Pneumatic cylinder Ø63 double acting LH series...
Pneumatic cylinder Ø63 double acting LH series - stroke on request Aignep

Pneumatic cylinder Ø63 double acting LH series - stroke on request Aignep

Special material, cut to size, shipping time approx. 3-5 days
€125.60 Tax included

€105.55 tax excl.

Pneumatic cylinder Ø63, manufactured with a stroke according to the customer's needs, double magnetic effect and with pneumatic cushioning. Made in Italy according to ISO 15552 (Ex ISO 6431). Extruded aluminum body with slots for magnetic detectors, chrome-plated steel piston rod. ATEX cylinders as standard.

Reference: LH063xxxx

Cylinder stroke: 25mm to 2400mm. Indicate the length you need in the side menu.


Esquema cilindro doble efecto amortiguación neumática
Logotipo Aignep
Logotipo ATEX para cilindros
Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated
.

No queries yet, leave the first!
 

Pneumatic cylinder diameter 63 mm, stroke according to customer's requirements, standard version, double acting with pneumatic cushioning and prepared for magnetic detection. The pneumatic cylinder is manufactured according to ISO 15552 (Ex ISO 6431), with aluminum sleeve. Chrome-plated or stainless steel piston rod (depending on version). Wide range of accessories for mounting the pneumatic cylinder.

The stroke of a pneumatic cylinder (stroke) is the difference between the dimensions of the piston rod when it is fully retracted and fully extended.

Carrera de un cilindro neumático

The "L" range of pneumatic cylinders manufactured by Aignep is available in a wide variety of versions.

  • Standard version. Standard range for automation. Working temperature from 0ºC to +80ºC, NBR seals, low friction. Chrome-plated or INOX AISI 303 piston rod
  • Long life version. Working temperature from -20ºC to +80ºC, polyurethane seals.
  • High temperature and chemical compatibility version. Working temperature from -10ºC to +150ºC, all seals in FKM.
  • Low temperature version. Working temperature from -40ºC to +80ºC, polyurethane seals.
  • Version with rod scraper in FKM. Front temperature from -10ºC to 150ºC.
  • Resistant to water and chemical washing. Temperature from -10ºC to +60ºC, waterproof polyurethane seals, INOS AISI 303 stem. Special black cataphoresis painting.
  • Corrosion resistant, compatible with chemical agents. Temperature range from -10ºC to +150ºC, all seals in FKM, metal wiper on stem, INOX AISI 303 stem. Specially painted black cataphoresis caps.
  • Standard version, AISI 303 STAINLESS STEEL stem
  • LH-IS" series. Standard range with AISI 303 STAINLESS STEEL piston rod

Technical characteristics of the pneumatic cylinder:

  • Manufacturer: Aignep
  • Manufacturer's reference: LH063xxxx
  • Diameter and stroke: Ø63 mm, stroke according to customer's needs.
  • Type: Double-acting pneumatic cylinder
  • Cushioning: Pneumatic
  • Type of fluid: Air with or without lubrication
  • Manufacturing standard: ISO 15552
  • Maximum operating pressure: 10 bar (1 Mpa)
  • Minimum starting pressure: 0.1 bar (0.1 Mpa)
  • Type of seals: NBR
  • Operating temperature: 0ºC to +80ºC (-20ºC if totally dry air)
  • Type of construction: Chrome-plated steel stem
  • Air connection thread size: G 3/8"
  • Stem diameter: 20mm
  • Piston rod thread: M16x1,5
  • ATEX Cylinders: - II 2 GD c T6 -20 ° C
  • Theoretical maximum force that the cylinder can develop on thrust
    • Pressure 5 kg/cm²: 155.9
    • Pressure 6 kg/cm²: 187.0
    • Pressure 7 kg/cm²: 218.2
  • Theoretical maximum force that the cylinder can develop in traction
    • Pressure 5 kg/cm²: 140.2
    • Pressure 6 kg/cm²: 168.2
    • Pressure 7 kg/cm²: 196.2

Dimensiones cilindros serie L Aignep - Adajusa

Material for professional use, to be installed in compliance with the regulations in force at the place of installation.
The cylinder is prepared for mounting magnetic detectors and various accessories. The supply only includes the cylinder, the rest of the accessories must be ordered separately.
Material cut to size, once the order has been processed, it cannot be cancelled or modified. The accuracy of the cut is ±3mm.
For further information you can download the technical data sheet by clicking on the tab "Attachments"


Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Reviews
Product added to wishlist
Product added to compare.