Stainless single roller chain 3/4 12BSS-1 DIN 8187 Tsubaki - ADAJUSA
Stainless single roller chain 3/4 12BSS-1 DIN 8187 Tsubaki - ADAJUSA

Double stainless steel roller chain step 19.05 3/4 12BSS-2 DIN 8187 - Tsubaki

€288.91 Tax included

€242.78 tax excl.

Chain of double rollers in stainless steel according to European standard ISO DIN 8187, up to 98% performance (*), very light and compact which allows them to be installed in very limited spaces.

Reference: CADE-RS 12BSS-2:TSU

Pitch: 19.05 mm - 3/4"

Roller diameter: 12.07 mm



Price per meter. Sale exclusively by packaging of multiples of 5 meters.

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Roller chain in stainless steel, in accordance with the requirements of ISO DIN 8187. Made in Japan.

A roller chain is a series of bearings connected by meshes (plates), great versatility and durability in environments with a lot of dust, oil, water, greases, etc ... Roller chains develop a synchronous power transmission, without slippage, and the effectiveness of the transmission does not depend on the transmitted mechanical stress.

They can be used in a wide range of industrial and general applications, motors, compressors, printing presses, conveyors, agriculture....

All the basic components of this chain are made of SUS304 stainless steel (except the presillas, which are made of SUS301).

These chains can be used in special environments, such as underwater and in acydic and alkaline applications. They can also be used in low and high temperatures (-20 °C to +400 °C). The SUS304 is only slightly magnetic, which is the result of the cold setting process.


Characteristics:

  • Manufacturer: Tsubaki
  • Reference: CADE-RS 12B-2-SS:TSU
  • Stainless steel
  • Sale by packaging of 5 meters of chain.
  • Pitch (P): 19.05 mm
  • Roller diameter (d1): 12.07 mm (max)
  • Internal width (b1): 11.68 mm (min)
  • Shaft diameter (d2): 5.72 mm (max)
  • Length of the union
    • (L): 42.00 mm (max)
    • (Lc): 44.40 mm (max)
  • Mesh height (h2): 16.13 mm
  • Shaft width (T): 1.85 mm
  • Mesh thickness: (Pt): 19.46 mm
  • Minimum breaking load (Q ISO/DIN) 57.80 kN
  • Average breaking load (Q0): 66.60 kN
  • Approximate weight: 2.31 kg/m

(*) Under correct lubrication conditions.

Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab



Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

You might also like

16 other products in the same category:

Reviews
Product added to wishlist
Product added to compare.