Pressure switch 3/8" Syntesi Metal Work - ADAJUSA
Pressure switch 3/8" Syntesi Metal Work - ADAJUSA

Pressure switch Size 1 3/8 2m cable Syntesi - Metal Work

€59.13 Tax included

€49.69 tax excl.

3/8" size 1 pressure switch, presents a high degree of miniaturization. It is a device whose function is to open or close circuits depending on the adjusted pressure.

Reference: 5613S103

syntesi pressure switch diagrammetal work logo

Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

3/8" size 1 pressure switch, it has a high degree of miniaturization. They are ready assembled with a 2 m cable or with an M8 connector with a 300mm cable. The contact is of the switch type, so they can be normally open or closed. They can be regulated by means of a knurled push-lock knob.

Characteristic:
  • Manufacturer: Metal Work
  • Reference: 5613S103
  • Discharge threaded coupling: 3/8"
  • Maximum current / maximum voltage: 2A / 250V
  • Cable outer diameter: 4.9mm
  • Number and section of wires: 3 x 0.5mm²
  • Contacts: normally open (NO) and normally closed (NC)
  • Protection: IP65
  • pressure max. admitted:
      • bar : 15
      • MPa: 1.5
      • psi: 217
  • Flow rate of additional air intakes 6.3 bar (0.63 MPa; 91 psi) ΔP 1 bar (0.1 MPa; 14 psi): Nl/min 500 - scfm 18
  • temperature at 10 bar ; 1MPa; 145psi°: -10÷+50
  • Fluid: Filtered air with or without lubrication, if lubrication is used it must be continuous.
  • Mounting position: In any position
  • Supplementary air intake, for pressure gauge or fitting: 1/8”, front and rear
  • Wall fixing screws: Number 2 M4 screws



Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Manometer 40 1/8 0-12 bar... Manometer 40 1/8 0-12 bar... 2
Gauges and measurement elements

Manometer 40 1/8 0-12 bar back plastic box - Metal Work

Metal Work
MWMP4318012
€5.96 (€5.01 tax excl.)
Pressure gauge diameter 40 with plastic case. Pressure gauge to control the pressure of the machine to be used. Black plastic case and rear connection with G thread 1/8". The internal mechanisms are made of brass and bronze. With metal dial, graduation in bar and psi. Steel needle.Reference: MP4318012 Representative image for illustrative purposes,...
Filter + Regulator + Lubricator New Deal - Metal Work - ADAJUSA
Filter groups 3/8

Pneumatic filter group 3/8 regulation 0-12 bar semi-automatic purge New Deal series -...

Metal Work
1324054
€136.58 (€114.77 tax excl.)
3/8 filter group, 3/8 maintenance unit for pneumatic applications, semi-automatic drain, in 3 modules (F+R+L) and regulation range 0-12 kg/cm2. Filtering unit with 20 μm filter. These groups are made of aluminum and plastic tanks with metal protection. European made material.Series: New DealReference: 1324054 Representative image for illustrative...

16 other products in the same category:

Valve + Filter + Lubricator T1 Syntesi - Metal Work - ADAJUSA
Filter groups of 1/8 FR-L

Filter group 1/8 with shut-off valve regulation 0-8 bar automatic drain Syntesi series...

Metal Work
5611V10B54L1
€136.31 (€114.55 tax excl.)
1/8 filter group with manual shut-off valve , 1/8 maintenance unit for pneumatic applications, automatic drain, compact size (SY1) and regulation range 0-8 kg/cm2. Equipped with manual cut-off valve at the inlet. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing. Series:...
Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA 2
  • Pack
Gauges and measurement elements

Pressure gauge with glycerin 0 - 1.6 bar for 63mm panel with stand - Metal Work

Metal Work
PK-MAN6320G4G1.5SOP
€15.76 (€13.24 tax excl.)
Pressure gauge diameter 63mm with stainless steel case filled with glycerin, pressure indication between 0 and 1,6 bar. Pressure gauge to control the pressure of installations, systems or machines. Stainless steel case with rear connection with G 1/4" thread. The internal mechanisms are made of copper alloy. With metal dial, graduation in bar. Steel...
Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA 2
  • Pack
Gauges and measurement elements

Pressure gauge with glycerin 0 - 4 bar for 63mm panel with stand - Metal Work

Metal Work
PK-MAN6320G4G4SOP
€15.28 (€12.84 tax excl.)
Pressure gauge diameter 63mm with stainless steel case filled with glycerin, pressure indication between 0 and 4 bar. Pressure gauge to control the pressure of installations, systems or machines. Stainless steel case with rear connection with G 1/4" thread. The internal mechanisms are made of copper alloy. With metal dial, graduation in bar. Steel needle....
Regulator pressure 1/8 0-12...
Compressed air filtration and treatment groups

Regulator pressure 1/8 0-12 bar FRL MINI - series Aignep

Aignep
T020002040000
€16.84 (€14.15 tax excl.)
Regulator 1/8"pressure regulator, with regulation between 0-12 bar, technopolymer body and metal endings, extreme reliability. Allows stability of the outlet pressure at the preset pressure.Series: FRL MINIReference: T020002040000 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.
Pneumatic filtering group... Pneumatic filtering group... 2
Filter groups of 1/8 FR-L

Pneumatic filtering group 1/8 regulation 0-12 bar semi-automatic purge FRL Mini series...

Aignep
T200002241100
€57.81 (€48.58 tax excl.)
1/8 filtering group, 1/8 maintenance unit for pneumatic applications, semi-automatic purge, compact size in 3 modules (FR+R+L), and regulation range 0-12 kg/cm2. These filtering groups are manufactured in technopolymer and with metallic terminations. European manufacture.Series: FRL MiniReference: T200002241100 Representative image for...
Regulator pressure 1/8 0-8... Regulator pressure 1/8 0-8... 2
  • Pack
Compressed air filtration and treatment groups

Regulator pressure 1/8 0-8 bar complete series FRL MINI - Aignep

Aignep
PK-T020002030000
€25.11 (€21.10 tax excl.)
Regulator 1/8 completepressure regulator, with regulation between 0-8 bar, technopolymer body and metal endings, extreme reliability. Allows stability of the outlet pressure at the preset pressure.Series: FRL MINIReference: PK-T02000202030000 Representative image for illustrative purposes, the item supplied will correspond to the specifications...
Filter 1/8 20 RMSA Size 1 Syntesi Metal Work - ADAJUSA
Filter groups of 1/8 FR-L

Filter 1/8 20 microns semi-automatic drain size 1 Syntesi series - Metal Work

Metal Work
5611F201
€25.38 (€21.33 tax excl.)
1/8 filter, with a filtration degree of 20μm and semi-automatic discharge, size 1, for retention of solid or liquid impurities from the air compressor. These filter cups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5611F201Representative image for...
Filter-regulator 1/8 T1 Syntesi - Metal work - ADAJUSA
Filter groups of 1/8 FR-L

Pneumatic filter-regulator 1/8 0-8 bar semi-automatic drain Syntesi series - Metal Work

Metal Work
5611B241
€42.29 (€35.54 tax excl.)
Filter with 1/8 pneumatic pressure regulator, 1/8 maintenance unit for pneumatic applications, semi-automatic drain, compact size (SY1) and regulation range 0-8 kg/cm2, filtration degree of 20 μm. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference:...
Filter-regulator 1/8 T1 Syntesi - Metal work - ADAJUSA
Filter groups of 1/8 FR-L

Pneumatic filter-regulator 1/8 0-12 bar automatic drain Syntesi series - Metal Work

Metal Work
5611B561
€64.13 (€53.89 tax excl.)
Filter with 1/8 pneumatic pressure regulator, 1/8 maintenance unit for pneumatic applications, automatic drain, compact size (SY1) and regulation range 0-12 kg/cm2, filtration degree of 20 μm. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing. Series: Synthesis Reference:...
Regulator pressure 1/8 0-12... Regulator pressure 1/8 0-12... 2
  • Pack
Compressed air filtration and treatment groups

Regulator pressure 1/8 0-12 bar complete FRL MINI series - Aignep

Aignep
PK-T020002040000
€25.11 (€21.10 tax excl.)
Regulator 1/8 completepressure regulator, with regulation between 0-12 bar, technopolymer body and metal endings, extreme reliability. Allows stability of the outlet pressure to the preset pressure.Series: FRL MINIReference: PK-T02000202040000 Representative image for illustrative purposes, the item supplied will correspond to the specifications...
Pressure gauge 40 1/8 0-4 Kgr box in plastic - Metal Work Pressure gauge 40 1/8 0-4 Kgr box in plastic - Metal Work 2
Gauges and measurement elements

Manometer 40 1/8 0-4 bar back plastic box - Metal Work

Metal Work
MWMP431804
€5.96 (€5.01 tax excl.)
Pressure gauge diameter 40 with plastic box. Pressure gauge to control the pressure of the machine to be used. Steel case painted in black and rear connection with G thread 1/8". The internal mechanisms are made of brass and bronze. With metal dial, graduation in bar and psi. Steel needle.Reference: MP431804Representative image for illustrative purposes,...
Valve + Filter + Lubricator T1 Syntesi - Metal Work - ADAJUSA
Filter groups of 1/8 FR-L

Filter group 1/8 with shut-off valve regulation 0-8 bar semi-automatic drain Syntesi...

Metal Work
5611V10B24L1
€114.47 (€96.19 tax excl.)
1/8 filter group with manual shut-off valve , 1/8 maintenance unit for pneumatic applications, semi-automatic drain, compact size (SY1) and regulation range 0-8 kg/cm2. Equipped with manual cut-off valve at the inlet. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European...
Filter 1/8 20 micron...
Filter groups of 1/8 FR-L

Filter 1/8 20 micron semi-automatic purge FRL MINI series - Aignep

Aignep
T010002201000
€16.53 (€13.89 tax excl.)
1/8 filter, with a filtration degree of 20μm and semi-automatic discharge, compact size, for retention of solid or liquid impurities from the air compressor .These filtering cups are made of technopolymer and finished in metal. Made in Italy. Series: FRL miniPart number: T010002201000 Representative image for illustrative purposes, the item supplied...
Pneumatic filtering group...
Filter groups of 1/8 FR-L

Pneumatic filtering group 1/8 regulation 0-8 bar semi-automatic purge FRL Mini series -...

Aignep
T100002231100
€51.69 (€43.44 tax excl.)
1/8 filtering group, 1/8 maintenance unit for pneumatic applications, semi-automatic purge, compact size in 2 modules (FR+L), and regulation range 0-8 kg/cm2. These filtering groups are manufactured in technopolymer and with metallic terminations. European manufacture.Series: FRL MiniReference: T100002231100 Representative image for illustrative...

Customers who bought this product also bought:

Pressure regulator 1/4 0-12 bar technopolymer - Metal Work
Filter groups of 3/8 FR-L

Pressure regulator 3/8 0-12 bar size 1 Syntesi technopolymer - Metal Work

5613R163
€31.05 (€26.09 tax excl.)
3/8 pressure regulator regulation 0-12, size 1, body in technopolymer extreme reliability. Allows stability of the output pressure at the preset pressure. Possibility of fixing through side holes. Padlock locking system. Syntesi Group Reference: 5613R163 Representative image for illustrative purposes, the supplied article will correspond to the...
Filter-regulator 3/8 T1 Syntesi - Metal work - ADAJUSA
Filter groups of 3/8 FR-L

Pneumatic filter-regulator 3/8 0-8 bar semi-automatic drain Syntesi series - Metal Work

5613B243
€42.29 (€35.54 tax excl.)
Filter with 3/8 pneumatic pressure regulator, 3/8 maintenance unit for pneumatic applications, semi-automatic drain, compact size (SY1) and regulation range 0-8 kg/cm2, filtration degree of 20 μm. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing. Series:...
View
Home
Product added to wishlist
Product added to compare.