Transformer 63VA E:230/400V S:24V IP-00
Transformer 63VA E:230/400V S:24V IP-00

Transformer 160VA E:230-400V S:115-230V IP-00

€47.17 Tax included

€39.64 tax excl.

Single-phase isolation transformer for switching, command and control, and general uses. Transformer power 160VA, IP-00 protection rating. Input voltage 230 or 400Vac, and two possible output voltages: 115V or 230Vac; either combination allows the transformer to deliver its full power. Mounting via screws or DIN rail.


Reference: TF041163200

Diagram of a transformer with 2 Adajusa windings

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Single-phase isolation transformer for command, control, and general uses. Input voltage of 230 or 400 Vac and two possible output voltages, 115 or 230 Vac, each selectable via jumpers. The transformer provides 160 VA of power, with IP-00 protection. Depending on the connection of the two output secondaries, the transformer can supply 115 Vac, with a current of 1.39 A (apparent current), or 230 Vac, with a current of 0.69 A (apparent current).

The main application of this type of transformer is for command and control in industrial automation systems and for general applications. They are intended to power electrical devices where galvanic isolation between circuits and/or voltage level adaptation are required.


These types of transformers are reversible.


The transformer can be secured with screws or on a DIN rail. The DIN rail must be secured using the dedicated accessory, reference KITDINKF2. This accessory is not included in the scope of delivery and must be purchased separately.




Technical characteristics of the transformer:

  • Reference: TF041163200
  • Transformer type: Single-phase
  • Primary voltage: 230-400 Vac (selectable by jumpers)
  • Secondary voltage: 115-230Vac (selectable by jumpers)
  • Nominal power: 160VA
  • Maximum intensity in the secondary (In): 1.39A (115Vac) / 0.69A (230Vac) (selectable by jumpers)
  • Frequency: 50/60 Hz
  • Dielectric strength between primary and secondary: 4500V
  • Dielectric strength between primary and ground: 3500V
  • Winding: copper wire, class H. Primary and secondary separated (galvanic separation)
  • Protection level: IP00
  • Protection class: I
  • Insulation class: Tª 40ºC/F
  • Connection: Screw-fastener terminals
  • Weight: 2.38kg
  • Transformer encapsulation: Varnished
  • Mounting: By screws or DIN rail fixing
  • Regulation: EN-61558-2-4

Dimensions of TF Adajusa transformers - Manumag


Electrical connection:

Electrical diagram of parallel series transformers 115-230

The transformer is supplied without any type of overload protection; it is mandatory to install them to avoid overloading the transformer.

The power and current indicated are apparent, the active current provided by the transformer will depend on the power factor of the connected load.



Professional use material, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.