Control panel and protection ECO-VE-COMBI triphasic 32A PLUG SCHUKO Toscano ADAJUSA
Control and protection panel ECO-VE-COMBI triphasic 32A socket Schuko Toscano | ADAJUSA
Control panel and protection ECO-VE-COMBI triphasic 32A PLUG SCHUKO Toscano ADAJUSA
Control and protection panel ECO-VE-COMBI triphasic 32A socket Schuko Toscano | ADAJUSA

Protection panel 4x32A recharging electric vehicle socket Schuko ECO-VE-COMBI-4P32T15S - Toscano

€467.50 Tax included

€392.86 tax excl.

32A three-phase control and protection panel for electric vehicle recharging point, according to scheme 1 and 3 of the ITC-BT-52 standard. Equipped with IGA 32A 10kA , class "A" differential and key lock. Degree of protection IP65. Schuko plug with associated circuit breaker 10A maximum.


This panel is equipped with protectors against overvoltages, both transient and permanent.

Reference: ECO-VE-COMBI-4P32T15-S
Toscano_version 1 color without legend
Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications. 

No queries yet, leave the first!
 
The ECO-VE-COMBI control and protection panels are designed to protect electric vehicle charging stations according to the ITC-BT-52 directive. 


The protection panel is equipped with protection against both permanent and transient overvoltages in the electrical network.

Protection against transient surges protects against electrical discharges filtered by the network due to an electrical storm and impacts by lightning or maneuver of the transformers that supply the network. This protection diverts said discharge to the earth connection, preventing it from reaching the charging station. If the protection is activated, red indicators will be shown on the device in addition to preventing reconnection. If so, it will be necessary to change the temporary protection cartridge by pulling it firmly and replacing it with a new one. The permanent protection protects against voltage surges in the network greater than 275 V according to the EN 50550 standard, limiting the operation of the equipment and preventing a voltage greater than this from reaching the charging station.


General characteristics:

  • Manufacturer: Tuscan
  • Reference: ECO-VE-COMBI-4P32T15-S
  • Amperage: 4x32A
  • Power: 22.17kW
  • Rated voltage: 230Vac (L/N) / 400VAC (L/L) 50/60Hz
  • Vigivolt protection consumption: 0.3VA
  • Maximum section in terminals: 25mm²
  • Environmental margins: -5ºC to +40ºC / 80º RH
  • Degree of protection: IP65
  • Dimensions (mm): 362x362x160
  • Lock: Metal key lock

Permanent Features:

  • Trigger voltage: >270Vac
  • Response time due to overvoltage: according to EN 50550 standard

IGA Characteristics

  • Rated current: 32A
  • Trigger curve: C
  • Breaking power: 10kA

Differential Characteristics:

  • Class A: Alternating and pulsed current
  • Leakage current: 30mA

Transient Features:

  • Maximum voltage Uc: 320VAC (L/N)
  • Protection level Up (L/N) (N/PE):
  • Maximum discharge current (8/20µs) Imax (L/N) (N/PE): 15kA
  • Class: II

Rules:
IEC 61643-11 / EN 61643-11/ IEC 61439-123 / ITC-BT-52 / EN 50539-11:2013/A1:2014 / EN 60269-6:2011 / IEC 60364-7-712:2017 RLV / EN 60947 3:2009/A2:2015 / EN 61439-1:2012/ EN 61439-2:2012 / A11:2018


Connection:




For more information, you can download the technical sheet by clicking on the "Annexes" tab.
Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Reviews
Product added to wishlist
Product added to compare.