Control and protection panel ECO-VE-COMBI single- single-phase 25A Toscano ADAJUSA
Control and protection panel ECO-VE-COMBI single- single-phase 25A Toscano ADAJUSA

Control and protection 2x25A panel for electric vehicle recharging ECO-VE-COMBI-2P25T15- Toscano

€165.77 Tax included

€139.30 tax excl.

25A single- single-phase control and protection panel for electric vehicle recharging point, according to scheme 1 and 3 of the ITC-BT-52 standard. Equipped with IGA 25A, class "A" differential and key lock. Degree of protection IP65.

This panel is equipped with protectors against overvoltages, both transient and permanent.

Reference: ECO-VE-COMBI-2P25T15
Toscano_version 1 color without legend
Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications. 

No queries yet, leave the first!
 

The ECO-VE-COMBI control and protection panels are designed to protect electric vehicle charging stations according to the ITC-BT-52 directive.

The protection panel is equipped with protection against both permanent and transient overvoltages in the electrical network.

Protection against transient surges protects against electrical discharges filtered by the network due to an electrical storm and impacts by lightning or maneuver of the transformers that supply the network. This protection diverts said discharge to the earth connection, preventing it from reaching the charging station. If the protection is activated, red indicators will be shown on the device in addition to preventing reconnection. If so, it will be necessary to change the temporary protection cartridge by pulling it firmly and replacing it with a new one. The permanent protection protects against voltage surges in the network greater than 275 V according to the EN 50550 standard, limiting the operation of the equipment and preventing a voltage greater than this from reaching the charging station.


General characteristics:

  • Manufacturer: Toscano
  • Reference: ECO-VE-COMBI-2P25T15
  • Amperage: 2x25A
  • Power: 5.75kW
  • Rated voltage: 240Vac (L/N) 50/60Hz
  • Vigivolt protection consumption: 0.1VA
  • Maximum section in terminals: 25mm²
  • Environmental margins: -5ºC to +40ºC / 80º RH
  • Degree of protection: IP65
  • Dimensions (mm): 245x190x155
  • Lock: Metal key lock


Permanent Features:

  • Trigger voltage: >240Vac
  • Response time due to overvoltage: according to EN 50550 standard


IGA Features:

  • Rated current: 25A
  • Trigger curve: C
  • Breaking power: 10kA


Differential Characteristics:

  • Class A: Alternating and pulsed current
  • Leakage current: 30mA


Transient Features:

  • Maximum voltage Uc: 320VAC (L/N)
  • Protection level Up (L/N) (N/PE):
  • Maximum discharge current (8/20µs) Imax (L/N) (N/PE): 15kA
  • Class: II


Rules:

IEC 61643-11 / EN 61643-11/ IEC 61439-123 / ITC-BT-52 / EN 50539-11:2013/A1:2014 / EN 60269-6:2011 / IEC 60364-7-712:2017 RLV / EN 60947 3:2009/A2:2015 / EN 61439-1:2012/ EN 61439-2:2012 / A11:2018


Connection:




For more information, you can download the technical sheet by clicking on the "Annexes" tab.
Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.